TP5 is Net Portal but I assume that you wanted to use Terminal

if so, is there a fast way to change it?

Hey, Thanks for all the comments. I did this according to the Chinese version of the datasheet found here: https://jlcpcb.com/partdetail/Injoinic-IP6809/C2927864

Do you think it'd be a better idea to switch it to 0603 like the english one says

All capacitors are in 1210 package even if they have small values. It is not critical but you will need more room on PCB

big red capacitor

http://ic586.com/uploads/allimg/200601/1_200601101501_1.jpg

"The value of the resonant capacitor should be determined according to the application coil. For example, the equivalent capacitance value of C15, C16, C17, and C18 in parallel is designed as 345nF, and the equivalent capacitance value of C19, C28, C27, and C29 in parallel is designed to be 400nF. For A28 coil, other types of coil customization are supported."

Hey, This is in reference to the resonant capacitance values for the A28 coil at the bottom of page 12

Especially BOM list at page 13

please check values of C15-C18 and C27-C29 in the datasheet http://www.injoinic.com/wwwroot/uploads/files/20200214/690010fd6626ac8aef8ea7b229fa95ab.pdf

Nice catch! Thanks!

VCOIL_S is not connected you need to change Net Portal "VCOIL_SENSE" to "VCOIL_S"

No EPAD on symbol, big pad in the center of IP6809 should be connected to GND

Thanks!

@kaikwan the net portal "BST1" is not connected here. please move it to the right to see what I mean