ANT1 Pinout Details

flux

No. P1 is still not on any net. Its symbol has undefined pins, so the wire touching it is not an electrical connection. ANT1 pins remain on their nets (e.g., ANT on Net 3; VCC on VDD; GND on GND; DATA on Net 2).
Want me to make P1 expose a specific net (e.g., ANT1:ANT or VDD/GND)?
jordanstepney

jordanstepney

@help how do I configure P1’s pin to expose and connect to the ANT net?

flux

Here’s the most relevant Flux doc entry for connecting a terminal to a net:
“You might want to add a hole that's connected to a net. For example, if you want to connect a mounting hole to ground. This is done in the same way as adding a pad with a couple extra steps:
  1. On schematic, drag a terminal from the library onto the canvas.
  2. Connect the terminal to a net.
  3. Switch to PCB.
  4. Click on the pad to select it.
  5. In the toolbar which shows up above the pad on the canvas, click Pad Type. (Look for the square icon.)
  6. Select HOLE.”
    Source
To expose the ANT net on P1, apply step 2 using the ANT net in your schematic.

Flux stopped

Sign up to send
U1
P1
ANT1
R2
R1
CN1
B1
U2
C1
Capacitance
100nF
C2
Capacitance
100nF

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    Assets are files uploaded to this project which can be used in various ways.

    Economic Turquoise P.K.E. Meter thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Properties describe core aspects of the project.

    Pricing & Availability

    Distributor

    Qty 1

    Controls