Camera Cloud Connection Guide
Connect the TP4056 charger module terminals to the corresponding battery terminals as described.
Thought for 21 sec
The TP4056's charging circuit requires its BAT+ and BAT- terminals to be connected to the battery's positive and negative leads, respectively. For your project, please connect:
- The BAT+ terminal of TP4056_Module (U3) (pin 6) to your battery's positive terminal.
- The BAT- terminal of TP4056_Module (U3) (pin 5) to your battery's negative terminal from the 1200 mAh Lipo Battery.
This wiring aligns with the module’s requirements for effective charging and protection.
in the pcb section make the pcb more streamline in dimensions such that the pcb is 190 mm x 600 mm
Thought for 24 sec
Please follow the instructions in the Flux documentation on changing the board outline size. According to the guide, you can update the board dimensions by selecting the Layout object in the Objects panel and then editing its size rule. In the size rule, set the dimensions to 190 mm (x) and 600 mm (y). Detailed instructions can be found in the Changing board outline shape & size documentation.
View Documentation
