// Howdy 👋.
//
// This is where you can create powerful part automations like resistors that tell you when too much current is flowing through them
// You can also create your own flexible parts, like generics (https://docs.flux.ai/Introduction/generic-parts)
//
// If you are new to writing code in Flux make sure to check out our get started docs: https://docs.flux.ai/reference/introduction
//
// We also have a Flux Slack Community in case you need help: https://join.slack.com/t/fluxcommunity/shared_invite/zt-2ouyf80w6-7Wp81YlNEsuDFFdED9UQMA
//
// To infinity and beyond 🚀import numpy as np
import matplotlib.pyplot as plt
# Parametros del circuito
# Valores iniciales de los resistores variables(potenciometros) en ohmios
R1_initial = 10000 # 10 kOhm
R2_initial = 10000 # 10 kOhm
# Capacitancia en faradios
C = 1e-6 # 1 uF
# Frecuencia y ciclo de trabajo
# Frecuencia(aproximada) calculada con: f = 1.44 / ((R1 + 2 * R2) * C)