UM1663S Part Verification
Verify UM1663S only
Edit only this active personal part project. No children. Confirm owner jharwinbarrozo; wrong owner stops. Exact identity+pins verified dsq_f92b801a8c56a9fadaac src_md_1ee3a1c9029e091b; geometry dsq_992a48d8861e9332f126 src_md_d5bf98fa29fc6922. Datasheet https://www.union-ic.com/upload/Datasheet/Datasheet_UM1663_Rev01.pdf . Numbered pins 1 SW passive,2 GND/PGND ground,3 FB input,4 SHDN input,5 OVP input,6 VIN power in. SOT23-6 required lands0.7x0.9mm, pitch0.95mm, row centers2.4mm. Use parametric model node (not missing simply because no model asset); nominal model is not maximum envelope.
Read symbol/pins and actual pads, check distinct pads/no overlap, number mapping/top-view pin1, geometry, body and model fit. Repair confirmed errors only, do not qualify unverified body/model dimensions. Report skipped checks explicitly. No anchor edits, duplicate creation, sharing changes. Return owner, same UID, latest version and full short-ID URL, pin/pad counts, measured geometry/model fit and check verdicts.
After fixes are committed, publish corrected part as a new version of existing part and give version identifier. If no fixes needed do not republish.
Read symbol/pins and actual pads, check distinct pads/no overlap, number mapping/top-view pin1, geometry, body and model fit. Repair confirmed errors only, do not qualify unverified body/model dimensions. Report skipped checks explicitly. No anchor edits, duplicate creation, sharing changes. Return owner, same UID, latest version and full short-ID URL, pin/pad counts, measured geometry/model fit and check verdicts.
After fixes are committed, publish corrected part as a new version of existing part and give version identifier. If no fixes needed do not republish.
Thought for 17 sec
I’ll verify the owner, pins, pad geometry, and existing parametric model, and repair only confirmed errors. I’ll publish a new version only if a correction is needed.
Worked for 4 mins 19 sec
Created a project doc
Part Verification
Part Verification
Identity and publication
- Owner confirmed: jharwinbarrozo.
- Existing project: /jharwinbarrozo/um1663s
- Same part UID:
d6442b9c-9392-4aac-9bc4-6bd7e3bdc0a5. - Latest published version:
d338d030-a70d-49bc-a252-41f8f1840426(2026-10-26). - No confirmed electrical or land-pattern error found. No part-definition edits, anchor edits, duplicates, sharing changes, or republishing performed. This report is the only project addition.
Six terminals and six distinct enabled top-copper pad nodes. Each pad UID exactly matches its terminal element UID. Pin numbers are unique 1–6. Terminal names and electrical types match the supplied requirements. Top-view pinout is left top-to-bottom 1 SW, 2 GND, 3 FB; ...
Verified UM1663S, owned by jharwinbarrozo: 6 pins and 6 distinct pads pass mapping, pin-1 orientation, 0.7 × 0.9 mm land size, 0.95 mm pitch, 2.4 mm row spacing, and non-overlap checks. No confirmed fixes were needed, so I did not republish; UID remains
d6442b9c-9392-4aac-9bc4-6bd7e3bdc0a5, latest version d338d030-a70d-49bc-a252-41f8f1840426.The parametric model declares 1.600 × 2.900 × 1.175 mm, but rendered model fit and graphical-symbol checks remain unverified; measured results and skipped checks are recorded in project files: Part Verification.
