MAX8572EUT+T Part Verification
Verify MAX8572EUT+T only
Edit only active part, confirm owner jharwinbarrozo, no children/duplicates/sharing/anchor edits. Exact identity+pins evidence dsq_039572d62558c9924cae src_md_a3ca454796cf3e3a. Datasheet https://www.mouser.com/datasheet/3/1014/1/MAX8570-MAX8575.pdf . Geometry unresolved after two queries dsq_020ef7b478fbff0c443e dsq_10541b6fc145b7026cb3; default lands must stay unqualified absent sourced dimensions. Verify numbered pins vs symbol actual pads mapping/top-view pin1, distinct/nonoverlap count, measure geometry, inspect existing parametric body/model; not missing because no asset, nominal model isn't max envelope. Repair confirmed errors only. Return final owner/UID/version/full shortID URL, pin/pad counts, actual measurements, explicit skipped/unsupported checks.
After fixes committed publish corrected same part new version and give version ID; no republish if unchanged already published.
After fixes committed publish corrected same part new version and give version ID; no republish if unchanged already published.
Thought for 19 sec
I’ll verify the active MAX8572EUT+T part’s pin mapping, pad geometry, and existing model, and change only confirmed errors. I’ll keep the land pattern unqualified unless authoritative dimensions are available.
Worked for 4 mins 57 sec
Created a project doc
Part Verification
Part Verification
Outcome
Verification remains held / land pattern unqualified. Numbered terminal-to-pad mapping and pad distinctness pass. No confirmed electrical or geometry error was repaired; the part definition is unchanged and was not republished. This report is the only project addition. No children, duplicates, sharing changes, or anchor edits were made.
Identity and publication
- Active project owner confirmed:
jharwinbarrozo. - Active project and part UID:
b79491e6-b310-4456-86af-0687327b515a. - Full short-ID project URL: /jharwinbarrozo/max8572eutplust
- Published version:
c26b332d-2eff-4fb8-a147-8e9c66919317(latest and only version returned; published 2026-10-26).
Verified MAX8572EUT+T, owned by jharwinbarrozo: six numbered pins map to six distinct, nonoverlapping pads; the part definition is unchanged, so I did not republish (UID
b79491e6-b310-4456-86af-0687327b515a, version c26b332d-2eff-4fb8-a147-8e9c66919317).Actual measurements and skipped checks are in project files: Part Verification; land-pattern qualification, pin-1 silk alignment, and maximum model envelope remain unverified pending authoritative dimensions and usable visual inspection.
