BAV70LT1G Part Verification
Worked for 30 mins 50 sec
Thought for 12 sec
Wrote bav70-symbol.svg.
Thought for 17 sec
Wrote bav70-package.build123d.
Thought for 9 sec
Exporting symbol and model source assets.
Thought for 16 sec
Managing assets.
Thought for 14 sec
Set properties on ANODE and CATHODE.
Thought for 11 sec
Managing assets.
Thought for 12 sec
Editing package model.
Thought for 11 sec
Edited diode package model.
Thought for 11 sec
Reading layout details.
Thought for 11 sec
Looking at the symbol.
Thought for 15 sec
Getting project info.
Thought for 12 sec
Reading project assets.
Thought for 12 sec
Looking at the symbol.
Thought for 16 sec
Set properties on ANODE.
Thought for 14 sec
Looking at the 3D view.
Getting an isometric perspective of the layout.
Looking at the layout from the top.
Looking at the layout from the front side.
Thought for 17 sec
Looking for 3D-model assets.
Thought for 21 sec
Checking model scene seating transform.
Thought for 15 sec
Measuring converted model datum: exit 1.
Thought for 14 sec
Inspecting GLB geometry origin.
Thought for 16 sec
Checking preview copper seating height.
Thought for 15 sec
Completed 5 design checks.
Thought for 15 sec
Verifying custom diode graphic.
Thought for 46 sec
Referenced guidance.
Thought for 47 sec
Read self bav70lt1-d.pdf.
Thought for 14 sec
Reading project docs.
Thought for 36 sec
Created a project doc
Part Verification
Part Verification
Scope
Created and corrected the BAV70LT1G library part only; no board instance was added. Part UID:
Pin mapping — PASS
ab955387-9fd2-420e-aa62-8e837b727cc2. Project: /jharwinbarrozo/bav70lt1g.Pin 1 ANODE, pin 2 ANODE, pin 3 common CATHODE. All three implemented electrical types are Passive; functional names persist. Physical pad UIDs are identical to their terminal UIDs, so the mapping is preserved.
Footprint readback — PASS
Actual implemented coordinates in mm, in the footprint's X-right/Y-up frame:
Three distinct, nonoverlapping rectangular pads. Same-row anode pitch is 1.900 mm; row center span is 1.950 mm; outward copper span is 2.900 mm. The two anode lands have 1.340 mm edge spacing alon...
Thought for 16 sec
Reading "part-verification" project doc.
Thought for 21 sec
Publishing component.
Thought for a moment
The run stopped unexpectedly before finishing. Any completed work was kept.
what's not yet done here before the run has stopped?
Thought for 52 sec
The saved Part Verification file shows the pins and footprint completed, with the custom symbol and nominal 3D model attached. What remained unfinished was:
- Symbol display verification: the inspection renderer showed a placeholder instead of the custom artwork.
- 3D seating verification: XY alignment passed, but the front preview showed unexplained vertical separation.
- Final publication confirmation: no corrected published-version UUID is recorded.
The model is authored nominal geometry, not manufacturer STEP; courtyard and assembly outlines were intentionally omitted.
