ATI1934 Pinout and Footprint Verification


Verify/repair ONLY active ATI1934 UID 91a5ed64-6d76-4bbc-89cf-9b7a8d87f628 owner jharwinbarrozo URL /jharwinbarrozo/ati1934 initial85db9edc-8d1e-4889-b8e2-1d090eb27347. No children/anchor/placement/sharing. CRITICAL builder reports pin figure conflicts with pin table; creation used table 1 BOOST,2 GND,3 FB,4 EN,5 VIN,6 SW. Resolve using manufacturer evidence (query datasheet plus alternative revision/manufacturer page if needed). Do not declare mapping verified or guess when conflict unresolved; mark part blocked/incomplete. Exact ATI1934 bare part name/ordering and package also verify. Query land/body geometry twice if insufficient; verified claims only for corrections else name unqualified defaults. Inspect pins/types/count/mapping global pad sizes positions pitch/span top-view orientation/pin1 nonoverlap min gap and parametric SOT23-6 model/body node (renderer omission not absence). Identity gate before writes; confirmed fixes only unchanged no republish. After fixes committed publish corrected EXISTING part new version give ID. Return full compact report identity/version/changed flags measurements evidence handles all conflicts/gaps; no production-ready claim.
I’ll check the ATI1934 identity, resolve the conflicting pinout evidence, and inspect the footprint and model. I’ll change only confirmed errors and leave any unresolved mapping explicitly blocked.
The manufacturer’s original diagram and pin table agree; the only naming difference is BOOT versus BOOST on pin 1. I also found small footprint differences from the recommended lands and will correct those exact dimensions.
Created a project doc

Part verification and correction results

View Document

Part verification and correction results Identity and disposition
  • Active part identity gate passed twice before edits: owner jharwinbarrozo, name ATI1934, slug /jharwinbarrozo/ati1934~a3c, part UID 91a5ed64-6d76-4bbc-89cf-9b7a8d87f628.
  • Initial published version 85db9edc-8d1e-4889-b8e2-1d090eb27347.
  • Corrected existing part published version b72eddd1-b749-4e54-9f8a-9e7024612bd0; latest confirmed by version history.
  • Changed flags: source pad geometry YES; pin names/numbers/types NO; metadata/name/package NO; body/model NO; children/anchors/component placement/sharing NO.
  • Geometry commits: size #683de78b, left X #49d9609e, right X #0e1016f1.
  • Result: pinout concern resolved; footprint recommendation matched. No production-ready claim.
Verified the pin mapping against the original manufacturer diagram and table; BOOT/BOOST is only a naming difference. Corrected the existing part’s land dimensions and span, then published version b72eddd1-b749-4e54-9f8a-9e7024612bd0.
Full verification report contains identity, measurements, change flags, evidence handles, and remaining gaps; the default model remains unqualified, and no production-ready claim is made.

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
1
BOOST
Passive
Bootstrap; 10nF to SW
2
GND
Ground
Ground
3
FB
Input
Feedback, regulates to 0.8V
4
EN
Input
Enable; do not leave open
5
VIN
Power In
Input supply
6
SW
Power Out
Switching node to inductor

ATI1934