PN7160 Operating Conditions Extract
Thought for 37 sec
Below is the summary of the key recommended operating conditions extracted from the datasheet for the PN7160:
Table
| Parameter | Recommended Condition / Range | Notes |
|---|---|---|
| Supply | PN7160 is powered by VBAT within its operating range. | For all power states the supply is provided via VBAT. |
| TX Supply (VDD(TX)) | Active mode – TXLDO Configuration 1: 2.7 V, 3.0 V, 3.3 V, 3.6 VActive mode – TXLDO Configuration 2: 2.7 V, 3.0 V, 3.3 V, 3.6 V, 3.9 V, 4.2 V, 4.5 V, 4.7 V, 4.75 V, 5.0 V, 5.25 V | These values ensure full-power operation when VEN is high and VDD(PAD) is enabled. |
| Operating Temperature | Recommended operating ambient temperature includes at least the lower limit of –30°C as referenced in modification notes. | The datasheet shows characterization (e.g., Table 35) over an ambient range; only the lower limit is specifically updated here. |
| Power Modes / Conditions | Hard Power Down: VEN kept low (by host or SW) for minimum power consumption.Standby: VEN high with only essential blocks powered to enable wake-up sources.Active: VEN high, VDD(PAD) high and internal blocks fully supplied (with three sub-modes: Idle, Listener, Poller). | These modes allow the PN7160 to optimize current consumption based on operation needs. |
These conditions ensure the device is operated at delivered performance while managing power consumption according to application requirements.
If you need further detail on any specific parameter, please let me know!
Add appropriate components
Review thermal conditions
Clarify input/output levels
