Bluetooth PCB Design Help
Thought for 1 min 19 sec
I’ll create two Bluetooth PCBs: a wearable head‑tracking transmitter and a receiver that forwards data to a host.
- Steps:
- Capture requirements (BLE vs Classic, latency/range, battery life, form factor, receiver I/O: USB/UART or CAN with 120Ω termination).
- Transmitter: choose BLE SoC + 6/9‑axis IMU, battery/charger, user I/O; add connections.
- Receiver: choose BLE SoC/module + host interface (USB/UART or CAN), power; add connections.
- Complete schematics (decoupling, programming/reset) and reviews.
- Layout both boards with antenna keepouts; generate BOM/manufacturing files.
Click Start on the plan bar to proceed, or let me know if you want any changes.
Show me the schematic for them
Thought for 1 min 1 sec
You want schematics for a Bluetooth head‑tracking transmitter and a Bluetooth receiver. I’ve prepared a plan to build and show them:
- Create two schematic modules: Transmitter and Receiver.
- Transmitter: add BLE SoC, 6/9‑axis IMU, battery/charger/regulator, debug, user I/O; wire essentials and decoupling.
- Receiver: add BLE SoC/module, host interface (USB‑UART or UART header), power; wire essentials.
- Annotate nets, run ERC, prep PCB with antenna keepouts and BOM.
Click Start to generate the schematics.
Inspect current schematic
Choose BLE + IMU parts
Receiver host interface choice
Transmitter power requirements
