Connecting P1 and P2

How do I connect @P1 and @P2?

Thought for 1 min 9 sec

I wasn’t able to find a step-by-step guide on initiating a wire, but this entry from the Flux Reference may help once you’re in wiring mode:

“While in wiring mode, you can also change the wire angle (elbow) direction of the route by pressing the “f” key. To cancel the routing mode, press the escape key.”

Source: Positioning and wiring

You can read the full “Positioning and wiring” section for more details on drawing and manipulating wires in your schematic.

Flux Documentation: https://docs.flux.ai/Introduction/the-flux-method
Flux User Community: https://www.flux.ai/p/slack-community

Draw wire between ports

Wiring mode shortcut

Select wiring tool

Snap endpoints

Files

Code

Pins

Symbol

Layout

Preview

// Howdy 👋.
// If you are new to writing code in Flux make sure to check out our get started docs: https://docs.flux.ai/reference/introduction 
// We also have a Flux Slack Community in case you need help: https://join.slack.com/t/fluxcommunity/shared_invite/zt-p48n941f-wzQ06kGmuFJ2HXnGYT1JkA 
// To infinity and beyond 🚀 
const p1TerminalId = "5237503d-4662-b83a-7859-31969858b9c0"; //P1
const p2TerminalId = "e5e04a27-c5c4-f2e6-5799-708eb3f01464"; //P2
const p1Terminal = flux.getNodeById(p1TerminalId, "elementTerminal");
const p2Terminal = flux.getNodeById(p2TerminalId, "elementTerminal");
const outputVoltage = flux.createOutputNode("vout");
const inputVoltage = flux.createOutputNode("vin");
const current = flux.createOutputNode("I");
const partTypeProperty : any  = flux.properties.find((prop) => prop.name === "Part Type");
//setup event
flux.on("setup", () => {
    const capacitance = Number(flux.properties.find((prop) => prop.name === "Capacitance")?.value || 0.000001);

10uF 0603 Capacitor