WLR089U0-I/RM PCB Design
Thought
- Set Layout's sizeX to "50mm"
- Set Layout's sizeY to "35mm"
- Set Layout's boardShape to "rectangle"
- Set Layout's cornerRadius to "1mm"
- Set Layout's stackup to "Standard 4 Layer"
- Set Layout's boardInsetMargin to "0.2mm"
- Set Layout's keepOut to "0.2mm"
Thought for 2 sec
- Connected C4:P1, U2:BST to ^BUCK_BST
- Connected C4:P2, U2:SW, L1:P1 to ^BUCK_SW
- Connected R3:P1 to ^3V3
- Connected R3:P2, C5:P1, U1:
RESET, J3:15 to ^HDR_RESET - Connected C5:P2 to ^GND
Thought for 9 mins 49 sec
Placed 15 component(s): J2, U2, D1, C1, R3, J3, R1, C5, J1, C4, L1, D2, C3, C2, R2
Thought for 2 sec
- Set Layout's sizeX to "60mm"
- Set Layout's sizeY to "40mm"
- Set Layout's boardShape to "rectangle"
- Set Layout's cornerRadius to "1mm"
- Set Layout's stackup to "Standard 4 Layer"
- Set Layout's boardInsetMargin to "0.2mm"
- Set Layout's keepOut to "0.2mm"
