To achieve a resistance of 9k ohms in your project using the provided components or standard resistor values, you have a few options.

Since I don't see a designated resistor in your project with exactly 9k ohms resistance, we can create this value through series or parallel connections of available resistors or by suggesting a new resistor. Given the components you've listed, you have a 1k ohm (R1) and a 500 ohm (R2) resistor. Since neither directly satisfies your need and assuming you're open to adding components, I'll suggest how to achieve 9k ohms:

You can achieve a higher resistance value by connecting resistors in series. To get close to 9k ohms, you'd ideally use resistors in series that add up to that value. Since you'll likely need to add a component, one approach is to add an 8k ohm resistor to your project.

Then, connect it in series with R1 (1k ohms). This would give you: $R_{total} = R1 + R3 = 1k + 8k = 9k$

Connect as follows:

If for some reason adding an 8k ohm resistor isn't feasible and you prefer to use values you may more readily have, you could use a combination of parallel connections to achieve a total near 9k ohms, though it's a bit more complicated without knowing the specific values or quantities of resistors you have access to or are willing to add.

Alternatively, for simplicity, you could source a single 9k ohm resistor and add it to your project. If you decide to replace R1 or R2 with a 9k ohm resistor:

Please let me know if you need any further assistance or details regarding incorporating a 9k ohm resistor into your design, including specifics on sourcing or connecting additional resistors!