I am currently developing a dcdc converter half brisge current tap LLC resonant converter and I have a gain of 12 in my turns ratio ijn the transformer, the input voltage will vary between 400 and 600V nadc the output voltage is 24V with a 1kw output power i am currently developing the hardware, basically the shematic of the converter, i need to read this things: input voltage output voltage output current and can be an option read the ac current of the resonant tank for that i analyse several reference design and choose to utilize sensors from the texas instruments for this purpose, and now i need help in two things what is the common separation of the logic of the converter in pcbs, what i am saying is what are normally the separation or the division of each part of the converter in pcbs, if its common to have a pcb fro the crontrol another for the sensing another for the GaNs and other power the power itself? or if its usually everything done in just one pcb and not in the wway that i described that is several opcbs that will connected in each others another help that i need is help on chosing the correct sensors for that data aquisition, can you help me?