USB-C Wi-Fi/BLE Sensor Design

hananaaa

hananaaa

Design a control panel schematic for a Boric Acid Slurry Automatic Measurement System. Please represent the PLC and external devices using terminal headers or generic IC blocks if specific parts are unavailable. Add text notes for wire colors: Black(AC L), Blue(AC N / DC 0V), Red(DC +24V), Yellow(Signals).
  1. Power Supply:
  • Add a 220V AC input block.
  • Add an AC/DC SMPS (220V AC to 24V DC).
  1. Inputs (24V DC, Source Input logic):
  • Create 4 input paths powered by +24V.
  • X0: Connected via a Normally Open (NO) Pushbutton (Start).
  • X1: Connected via a NO Pushbutton (Stop).
  • X2: Connected via a NO Relay contact (representing Temp Controller 40°C).
  • X3: Connected via a NO Relay contact (representing Temp Controller 43°C).
  • Route all inputs to a generic block representing 'PLC Inputs'.
  1. Outputs (24V DC, Sink Output logic - switching to GND):
  • Create a block representing 'PLC Outputs' (Y0 to Y3).
  • Y0: Connect to the negative control input of an SSR. The load side of this SSR switches 220V AC for 'P-101 Pump'.
  • Y1: Connect to the negative coil of a standard DC Relay. The NO contact of this relay switches +24V DC for 'P-102 DC Pump'.
  • Y2: Connect to the negative control input of an SSR. The load side switches 220V AC for 'V-1 Main Pump'.
  • Y3: Connect to the negative coil of a DC Relay for an Alarm.
  1. Communication:
  • Add an RS-485 transceiver or a generic 2-pin header labeled 'RS-485 RDA/RDB for Turbidity Sensor'.

flux

0:24

Thought for a moment

I’ll add a separate control-panel schematic block for the boric acid slurry measurement system, using terminal headers/generic blocks for the PLC, SMPS, SSRs, relays, pumps, alarm, and RS‑485 sensor wiring. I’ll keep the existing design intact unless you explicitly ask me to replace it.

flux

12:14

Thought for 6 sec

1/5 Inspect existing schematic and identify safe way to add control-panel subsystem without disturbing prior sensor-node design

Thought for 11 sec

Read schematic.

Found 10 results for Find Flux library components for industrial control panel schematic using generic terminal block 2 pin or 3 pin, generic PLC input output block, AC DC SMPS 220VAC to 24VDC, solid state relay SSR AC load, DC relay coil, normally open pushbutton, pump motor, alarm buzzer, RS485 2 pin terminal header. Prefer generic schematic blocks or terminal headers if exact parts are unavailable..

Found 10 results for Terminal Block 2 Pin.

Found 2 results for Generic IC.

Found 10 results for Relay SPST NO.

Found 10 results for Solid State Relay SSR.

Thought for 12 sec

2/5 Find/add terminal blocks, generic PLC blocks, SMPS, relays, SSRs, pushbuttons, pumps, alarm, and RS-485 header

Thought for 5 sec

Found 1 results for Header 1x06.

Found 10 results for Terminal Block 6 Pin.

Found 4 results for normally open contact.

Found 10 results for DC Motor.

Found 10 results for buzzer.

Thought for 54 sec

Thought for a moment

Read IRM-30-24 datasheet for pin description input output 24V AC DC c.

Read CX240D5 datasheet for pin description solid state relay input .

Read RB105-DE datasheet for pin description 24VDC relay coil normall.

Thought for 26 sec

Thought for 10 sec

Read schematic.

Thought for a moment

Thought for 6 sec

Read schematic.

Thought for 18 sec

4/5 Add wire-color documentation notes to project files

Thought for 40 sec

Thought for a moment

5/5 Run schematic review and fix/justify issues

Thought for 7 sec

Completed design checks — found 126 issues.

Completed design checks — found 126 issues.

Completed design checks — found 126 issues.

Thought for 13 sec

5/5 tasks completed.

Thought for a moment

Added the Boric Acid Slurry control-panel schematic as a separate subsystem without removing the existing sensor-node design.
Completed:
  • 220 VAC input and 220 VAC → 24 VDC SMPS.
  • PLC input block with X0 Start, X1 Stop, X2 Temp 40 °C, X3 Temp 43 °C using +24 V source-input logic.
  • PLC output block with Y0–Y3 sink-output logic for SSRs/relays, P-101, P-102, V-1, and alarm.
  • RS-485 RDA/RDB terminal for turbidity sensor.
  • Wire-color notes documented in the project file: Boric Acid Slurry Automatic Measurement System — Control Panel Wiring.
Electrical review for the new control-panel wiring returned no matching ERC errors/warnings. Note: final SSR/relay/contact ratings should be checked against real pump current, inrush, enclosure, fusing, and local electrical safety requirements before panel build.
Add protection devices
Add field terminals
Check load ratings
Run full review
Create control BOM

Finished working

Sign up to send
온도조절기
K_P102 NO - P102 +
SSR_P101 AC_B - P101 +
P-102(DC 펌프)의 (-) 단자
PLC 출력부의 'COM' 단자 (COM1, COM2 등 사용하는 모든 COM)
온도조절기(SU-103SR3) OUT1의 COM 단자
계측펌프용 SSR의 제어 입력(+) 3번 단자
온도조절기 OUT1의 NO(A접점) 단자
정지 버튼의 출력(A접점) 단자
P-101(AC 순환 펌프)의 L선 입력 단자
PLC_OUT 4 - K_P102 COIL_2
CP_RS485 -
1번 릴레이의 COM 단자
CP_RS485_RDB_BLUE
CP_RS485+
SMPS '+V' 단자
시작 버튼 스위치의 입력(COM) 단자
지 버튼 스위치의 입력(COM) 단자
PLC_OUT
PLC의 'Y2' 단자
계측펌프용 코일의 (-) 단자
순환수조제어용 중간 릴레이의 코일(+) 단자
온도조절기 OUT1의 NO(A접점) 단자
시작 버튼의 출력(A접점) 단자
PLC의 'Y1' 단자
SMPS '-V' 단자
PLC_OUT 5 - SSR_V1 -DC
온도조절기(SU-103SR3) OUT2의 COM 단자
CP_RS485_RDA_YELLOW
1번 릴레이의 NO 단자
RS 485
PB_START 스위치
계측펌프
히터
Resistance
500 Ω
PB_STOP
터미널 DC-V
Pin Number
2
터미널
Pin Number
1
R1
Resistance
500 Ω
J_RS485
K2
순환펌프
SMPS
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.0k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

USB-C WiFi BLE Environmental Sensor Node b4cb

USB-C WiFi BLE Environmental Sensor Node b4cb thumbnail
Low-power consumer temperature and humidity sensor node using USB-C 5 V input, protected power path, ESP32 Wi-Fi/BLE connectivity, and a digital T/RH sensor.

Properties

USB-C 5 V sink; default Type-C current, compatible with 0.5 A to 3 A sources; protected by OVP/UVLO/OCP/reverse-current input stage and regulated 3.3 V rail.

USB-C power/programming, boot/reset buttons, status LED

2.4 GHz Wi-Fi 802.11 b/g/n plus Bluetooth Low Energy 5.x

Consumer environmental sensing / IoT

Digital temperature/relative humidity sensor on I2C; low-power ESP32-class module with native USB; protected USB-C VBUS path; 3.3 V regulator sized for Wi-Fi transmit current.

5

V

Pricing & Availability

Distributor

Qty 1

Arrow

$14.64–$18.56

Digi-Key

$7.18

HQonline

$10.40

LCSC

$45.30–$45.66

Mouser

$62.90

TME

$73.22

Verical

$64.34–$89.99

Controls