Solar Power System Design
Thought for 42 sec
Your request is to add four MOSFET components with 3‑pin connections to your schematic and establish the appropriate net connections as described. This includes:
-
High‑Side MOSFETs:
-
Low‑Side MOSFETs:
In addition, you will need to:
- Connect the positive of B1 to the Source of high‑side MOSFETs (Q1 and Q2).
- Tie the Source of low‑side MOSFETs (Q3 and Q4) to ground.
- Combine the Drain of Q1 and Q3 at the Motor Terminal A, and the Drain of Q2 and Q4 at the Motor Terminal B so the motor is driven across these nodes.
- Route the PWM signal appropriately between U18 and the MOSFET gates, ensuring proper level shifting or inversion as necessary.
Your request is to add these MOSFETs and their net connections into your Flux schematic as described.
Designate 3-pin MOSFET connections
Establish net connections
Verify net integrity
No schematic yet
Talk to Flux to get started.
