Temperature and Humidity Sensor Node Design
Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.
17 days
1:05
Planning response strategy.
Thinking deeply about your request.
Working on your request.
You want a low-power USB-C temperature/humidity sensor node with Wi-Fi + Bluetooth, and the plan is ready.
- USB-C 5 V entry with reverse, OVP, UVLO, and OCP protection
- Dual-radio MCU plus digital T/RH sensor
- Supporting power and interface circuitry
- Final schematic review, then layout prep
Click Start on the plan bar to build it. If you want, I can also update the plan first for size, antenna style, or enclosure constraints.
Plan
- Design and implement a low-power consumer temperature and humidity sensor node powered by USB-C 5 V, incorporating a digital temperature/RH sensor and an ultra-low-power MCU with dual-radio 2.4 GHz 802.11 b/g/n Wi-Fi plus BLE 5.x. Include robust USB-C power entry protection with reverse polarity, overvoltage, undervoltage lockout, and overcurrent protections supporting 0.5 A to 3 A sources.
#Implementation plan
-
Define node architecture and update project description
- Document the overall system: USB-C power entry, protection/power management, ultra-low-power dual-radio MCU, and digital temperature/RH sensor.
- Set project properties to reflect low-power consumer use for environmental sensing.
-
Implement USB-C power entry and protection subsystem
- Add and configure a USB-C receptacle component, rated for 5 V input.
- Add reverse polarity protection and configure necessary components (e.g., MOSFET or diode as appropriate).
- Add overvoltage protection circuitry using TVS diodes or dedicated ICs.
- Implement undervoltage lockout (UVLO) using a comparator or dedicated power supervisory IC.
- Design and add overcurrent protection circuitry capable of handling in the 0.5 A to 3 A range.
-
Add and integrate the ultra-low-power MCU with dual-radio functionality
- Select and add an MCU with integrated 802.11 b/g/n Wi-Fi and BLE 5.x support.
- Configure power supply decoupling and proper connections for digital and RF functions.
-
Include the digital temperature/RH sensor
- Add a digital temperature/humidity sensor component (e.g., using I2C or SPI interface).
- Connect the sensor to the MCU with appropriate decoupling and pull-up resistors, if needed.
-
Connect and review all circuitry
- Ensure that the protected 5 V rail is correctly distributed to all components requiring power.
- Connect sensor and MCU interfaces as per the design requirements.
- Verify that the power protection, MCU, and sensor sections meet the USB-C power specifications.
-
Prepare for PCB Layout
- Verify schematic integrity and functionality against the project requirements.
- Finalize the support circuitry to handle low-power operation and robust USB-C power management.
#Success criteria
- The schematic includes all key subsystems: USB-C driven power protection, dual-radio MCU and digital sensor circuitry.
- The USB-C power entry and protection circuit meets requirements for reverse, OVP, UVLO, and OCP for input currents ranging from 0.5 A to 3 A.
- Successful connection and integration of sensor and MCU components ensuring a complete environmental sensing node ready for PCB layout.
Use PCB antenna
Add ESD protection
Check sensor choices
17 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.