EyeDrop Counter Wiring Setup
Thought for 46 sec
Below is the consolidated net connectivity report detailing all signal and power connections along with the auxiliary components:
Table
| Net | Source Component | Target Component | Additional Components / Notes |
|---|---|---|---|
| I²C SDA | DA14531 | ICM-20948 | 4.7kΩ pull-up resistor on the SDA line |
| I²C SCL | DA14531 | ICM-20948 | 4.7kΩ pull-up resistor on the SCL line |
| SPI MOSI | DA14531 | Flash | Standard 4-wire SPI connection |
| SPI MISO | DA14531 | Flash | Standard 4-wire SPI connection |
| SPI SCK | DA14531 | Flash | Standard 4-wire SPI connection |
| SPI CS | DA14531 | Flash | Standard 4-wire SPI connection |
| Battery Input | Battery Source | Charging IC | Connected at the battery terminal of the Charging IC |
| Power Supply | Charging IC | Design main power rail | Output from the Charging IC supplies the system |
| Decoupling (All ICs) | Each power pin on DA14531, ICM-20948, and Flash | Ground | A 0.1µF capacitor is connected from each power pin to Ground |
| Charging IC Decoupling | Charging IC | Ground | Additional bypass and decoupling capacitors as per the Charging IC reference design |
This report consolidates all connections for the Quick EyeDrop Counter schematic. Let me know if you need any further details or adjustments!
verify power net labels
inquire naming conventions
add battery filter network
review decoupling guidelines
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.