Circuito de Memória para Farol Alto

Thought for 2 mins 32 sec

flux

Sim — revisei seu esquemático atual contra o mapa de solda pino‑a‑pino. Resultado objetivo:

O que está correto

Inversor da alavanca
- U4 -> R1; R1 -> Q1; Q1 -> U3; Q1 -> R3 e U1. OK.
Inversor de reset
- SW1 -> R2; R2 -> Q2; Q2 -> GND; Q2 -> R4 e U1. OK.
Flip‑flop CD4013
- U1 ligado a U1 via net TOGGLE_FB. OK.
- U1 em U1; U1 em GND. OK.
Estágio de potência
- U1 -> R5 -> R5 -> Q3. OK.
- Q3 -> GND. OK.
- Q3 U5 em uma net dedicada (sem nome). OK funcionalmente.
- U5 NÃO está no GND (NC). OK.
Proteção/entrada 12 V
- U3 -> U2 -> U2 -> R6 -> R6 (12V_PROT). OK.
- D1 em 12V_PROT e D1 em GND. OK.
- C1=100 nF entre 12V_PROT e GND; C2=47 uF entre 12V_PROT e GND. OK.
Valores já configurados
- R1=1 kΩ, R2=1 kΩ, R3=10 kΩ, R4=10 kΩ, R5=100 Ω, R6=10 Ω, R7=100 kΩ. OK.

Correções necessárias (2 pontos)

Entradas assíncronas do CD4013 e pulldown do gate estão flutuando

Hoje a net UNUSED_LOW conecta juntos:
- U1, U1, U1 e R7,
- mas essa net NÃO vai ao GND. Resultado: S1/S2/R2 ficam em nível indefinido e o pulldown do gate não referencia o terra.
Ação sugerida: ligar TODOS esses nós diretamente ao GND.
- Conectar U1, U1, U1 e R7 ao net U3.

Clareza do net da lâmpada (opcional, funcionalmente já correto)

O fio entre Q3 e U5 está em um net sem nome.
Ação sugerida: renomear essa net para “LAMP_LOW” para evitar confusões em futuras edições.

Quer que eu aplique já essas correções? Posso:

Prender [U1:1SD], [U1:2SD], [U1:2CD] e [R7:P2] ao GND.
Renomear o net do dreno do Q3 com U5 para LAMP_LOW.

emerson89

esta pronto?

Thought for 3 mins 42 sec

flux

Net Connections to be added

Table

Net	Connections
GND	U1:1SD, U1:2SD, U1:2CD, R7:P2

Net Connections to be removed

Table

Net	Connections
UNUSED_LOW	U1:1SD, U1:2SD, U1:2CD, R7:P2

Updated 2 connections

0:11

Connected U1:1SD, U1:2SD, U1:2CD, R7:P2 to ^GND

Disconnected U1:1SD, U1:2SD, U1:2CD, R7:P2

SW1

U3 2 - U1 VSS

Q2 C - R4 P2

Q1 C - R3 P2

U3 2 - U1 VSS

R6 P2 - U1 VDD

UNUSED_CLK2

Resistance

100kohms

U2 2 - R6 P1

Q2 C - R4 P2

Q3 D - U5 1

U3 2 - U1 VSS

U4 1 - R1 P1

R6 P2 - U1 VDD

Resistance

100 ohms

Q3 D - U5 1

U1 1Q - R5 P1

Q2 C - R4 P2

U1 1SD - U1 2SD

U3 2 - U1 VSS

R6 P2 - U1 VDD

SW1 P2 - R2 P1

UNUSED_D2

R1 P2 - Q1 B

Q3 D - U5 1

Resistance

10kohms

U3 2 - U1 VSS

R6 P2 - U1 VDD

Resistance

10 ohms

U1 1SD - U1 2SD

R6 P2 - U1 VDD

SW1 P2 - R2 P1

Resistance

10kohms

R2 P2 - Q2 B

Q1 C - R3 P2

Q3 D - U5 1

R5 P2 - Q3 G

R1 P2 - Q1 B

R2 P2 - Q2 B

R6 P2 - U1 VDD

U3 2 - U1 VSS

U4 1 - R1 P1

U3 2 - U1 VSS

U3 1 - U2 1

U3 2 - U1 VSS

R5 P2 - Q3 G

Capacitance

100nF

Resistance

1kohms

U3 2 - U1 VSS

U2 2 - R6 P1

U1 1SD - U1 2SD

Capacitance

47uF

R5 P2 - Q3 G

Resistance

1kohms

U1 1Q - R5 P1

U3 2 - U1 VSS

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

Project Name

Functional Jade Dejarik

Description

Welcome to your new project. Imagine what you can build here.

Properties

System Architecture

Diagram

Pricing & Availability

Distributor	Qty 1
Arrow	$2.25–$3.89
Digi-Key	$6.10
LCSC	$3.29–$4.11
Mouser	$6.21
TME	$6.68
Verical	$2.95–$6.09

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

emerson89 / Functional Jade Dejarik

Schematic