Adding ESP32 to Project
add an esp32 to this project
Thought for 3 sec
I’ll add an ESP32 module to the schematic, choose a suitable library part, then run a quick project check so the new component is valid.
Worked for 3 mins 45 sec
I’m blocked: I couldn’t find a usable ESP32-S3-WROOM, ESP32-WROOM, or broader ESP32 module in the Flux parts library, so I did not add a placeholder part.
Open items:
- Need a real ESP32 component source before adding it.
- I submitted a missing-part request for ESP32-S3-WROOM / ESP32-WROOM.
Next steps:
- Send me a specific ESP32 module MPN or datasheet and I can use that.
- Choose a different MCU/module that exists in the Flux library.
- Wait for the ESP32 module to be added to the library, then I can add and wire it.
Use my MPN
Use uploaded datasheet
Pick alternative MCU
Add support circuitry
No schematic yet
Talk to Flux to get started.
