PCB Clone Request
Worked for 2 mins 12 sec
Creating file j2-double-ended-pins.build123d.
Thought for 9 sec
Managing assets.
Thought for 10 sec
Editing layout rules.
Thought for 7 sec
Editing layout rules.
Thought for 10 sec
Editing layout rules.
Thought for 12 sec
Editing layout rules.
Thought for 13 sec
Editing layout rules.
Thought for 9 sec
Editing layout rules.
Move the J2 connector holes and pins over to the right 2 mm
Thought for 12 sec
Understood. I’ll shift the entire J2 assembly—housing datum, all seven pass-through holes, and the double-ended pins—2 mm to the right, preserving their spacing and the new 6 mm protrusion on both sides.
Worked for 58 sec
Updated J2:
- Seven populated holes/pins shifted from cavities 4–10 to 1–7
- Pins now protrude 6 mm above and 6 mm below
- Entire J2 housing, holes, and pin model moved 2 mm right
- New J2 center: X −12.3 mm, Y 35.58 mm
Final visual verification remains pending because no ACUs are currently available.
Check J2 placement
Review placement issues
Add J2 silkscreen
