Smart Speaker Carrier Design
Thought for 2 sec
- Updated L1's label to FB3
- Updated L2's label to FB4
Worked
0:52
Started: Replace components FB3 and FB4 with Murata BLM21PG600SN1D (0805): remove the re-designated parts and add the Murata beads, reconnecting their nets..
Reading schematic for FB3, FB4.
Thought for 3 sec
- Added 2x BLM21PG600SN1D as FB3, FB4
- Removed 2 components
Worked
0:10
Started: Connect FB3:P1 to J1:VBUS4 on the VBUS net and connect FB3:P2, FB4:P1, FB4:P2, and GND:GND on the GND net..
Thought for 8 sec
- Connected FB3:P1 to J1:VBUS4
- Connected FB3:P2, FB4:P1, FB4:P2, GND:GND
Thought
All updates are complete. The specified capacitors and resistors now have their revised values, voltage ratings, dielectric types, manufacturers, MPNs, footprints, and Notes/Alternate properties. D1 was replaced with the TI TPD4E05U06DQAR and its CC/USB nets remain intact. J2 now uses the JST B2B-PH-K-S(LF)(SN) footprint with its original net connections preserved. FB1 and FB2 are set to Murata BLM21PG600SN1D (0805), and L1/L2 have been renamed to FB3/FB4 and assigned the same Murata bead and footprint. All success criteria have been met.
