24V to 5V Regulator Design

0:56

Deciding on plan vs consult.

Crafting a multi-step plan.

Navigating component linking rules.

Creating generic placeholders for links.

Summarizing plan steps.

You want a 24 V to 5 V regulator added. I’ve prepared a plan to select a suitable buck converter, add its required passives (inductor, caps, feedback), and wire VIN_24V -> +5V -> GND into your Teensy template. Click Start to run it.

Before we proceed, what’s:

Required 5 V current (peak/continuous)?
Actual VIN range (24 V nominal only, or e.g., 18–30 V)?
Any EMI/noise constraints or package preferences?

Plan

#Goal

Integrate a DC-DC buck regulator stage into the Teensy 4.1 template schematic to convert a 24 V nominal input to a regulated 5 V, 1.5 A output supply. The 5 V output will power the Teensy 4.1’s +5V rail (U1), and the design will include all necessary passives and optional input protection/emifilter features for a 24 V industrial supply.

#Implementation plan

Select and add the buck converter stage
1. Select a buck converter IC rated for 24 V input and 5 V, 1.5 A continuous output (e.g., a TI TPS54331 or similar component from the library).
2. Add the chosen buck converter IC to the schematic.
Add supporting passive components
1. Add input and output capacitors with voltage ratings above 24 V and 5 V respectively, ensuring low ESR types per datasheet recommendations.
2. Add an inductor sized according to the buck converter datasheet to handle the required current ripple at 24 V input.
3. Include the resistive voltage divider or feedback network required to set the 5 V output according to the regulator’s datasheet.
4. Add any bootstrap, compensation, or current sensing components as specified by the buck converter's application guidelines.
Implement input protection and EMI filtering (optional but recommended)
1. Add a reverse polarity protection diode or an ideal FET for the 24 V input line.
2. Introduce a TVS diode and optional ferrite bead or LC filter to mitigate EMI and voltage transients on the 24 V line.
Integrate the buck converter stage with the Teensy 4.1 schematic
1. Connect the 24 V input to the selected buck converter's VIN pin.
2. Route the 5 V output from the buck converter to the existing +5V net powering the Teensy 4.1 (U1).
3. Ensure proper ground connections between the buck converter and Teensy ground (GND) net.
Validate design and annotate layout guidelines
1. Perform ERC/DRC checks to verify the correctness of the connections and components.
2. Annotate component values, polarity, and layout suggestions such as short connection paths, decoupling practices, and thermal considerations based on the buck converter datasheet.

#Success criteria

Buck converter stage is added with a proper component selection meeting the 24 V to 5 V, 1.5 A requirement.
All necessary passive components and optional protection/EMI filtering are incorporated and connected per datasheet recommendations.
The 24 V input connects to the buck converter and the regulated 5 V output is correctly routed to power the Teensy 4.1 (U1) +5V rail with a verified schematic.

64 days

rchadgray

i would like the 5volt output current to be 1.5amps. VIN will be 24V nominal.

64 days

flux

1:19

Organizing project steps.

Clarifying project goals.

Linking components effectively.

Accessing knowledge base.

Executing tool calls.

I’ll add a 24 V-to-5 V, 1.5 A buck regulator stage and wire it to U1.

Plan:

Add a Buck Converter plus Inductor, Capacitor, and Resistor feedback/comp parts.
Optionally add TVS Diode, reverse-polarity Schottky Diode, and Ferrite Bead.
Create VIN_24V and +5V; connect I/O and GND.
Run checks.

Click Start to run this.

Plan

#Goal

Integrate a DC-DC buck regulator stage into the Teensy 4.1 template schematic to convert a 24 V nominal input to a regulated 5 V, 1.5 A output supply. The 5 V output will power the Teensy 4.1’s +5V rail (U1), and the design will include all necessary passives and optional input protection/emifilter features for a 24 V industrial supply.

#Implementation plan

Select and add the buck converter stage
1. Select a buck converter IC rated for 24 V input and 5 V, 1.5 A continuous output (e.g., a TI TPS54331 or similar component from the library).
2. Add the chosen buck converter IC to the schematic.
Add supporting passive components
1. Add input and output capacitors with voltage ratings above 24 V and 5 V respectively, ensuring low ESR types per datasheet recommendations.
2. Add an inductor sized according to the buck converter datasheet to handle the required current ripple at 24 V input.
3. Include the resistive voltage divider or feedback network required to set the 5 V output according to the regulator’s datasheet.
4. Add any bootstrap, compensation, or current sensing components as specified by the buck converter's application guidelines.
Implement input protection and EMI filtering (optional but recommended)
1. Add a reverse polarity protection diode or an ideal FET for the 24 V input line.
2. Introduce a TVS diode and optional ferrite bead or LC filter to mitigate EMI and voltage transients on the 24 V line.
Integrate the buck converter stage with the Teensy 4.1 schematic
1. Connect the 24 V input to the selected buck converter's VIN pin.
2. Route the 5 V output from the buck converter to the existing +5V net powering the Teensy 4.1 (U1).
3. Ensure proper ground connections between the buck converter and Teensy ground (GND) net.
Validate design and annotate layout guidelines
1. Perform ERC/DRC checks to verify the correctness of the connections and components.
2. Annotate component values, polarity, and layout suggestions such as short connection paths, decoupling practices, and thermal considerations based on the buck converter datasheet.

#Success criteria

Buck converter stage is added with a proper component selection meeting the 24 V to 5 V, 1.5 A requirement.
All necessary passive components and optional protection/EMI filtering are incorporated and connected per datasheet recommendations.
The 24 V input connects to the buck converter and the regulated 5 V output is correctly routed to power the Teensy 4.1 (U1) +5V rail with a verified schematic.

Pick buck IC with margin

Add input protection parts

Size inductor/caps

Check existing +5V net

64 days

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

RT1062 Teensy 4.1 Template

Description

Template for RT1062 Teensy 4.1 series ARM® Cortex®-M7 MPU Embedded Evaluation Board #template #project-template

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Digi-Key	$33.08
Mouser	$38.75

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

edutronica / RT1062 Teensy 4.1 Template

Schematic