Project Started
Thought for 2 sec
You can continue as soon as your account has usable ACUs again—either when your plan’s allocation resets or after adding more through your Flux billing settings. I can’t see your reset date or billing details.
Once restored, finishing the design will still require:
- Adding support components and wiring the schematic.
- ERC and power-path verification.
- Your schematic approval.
- PCB outline/stackup, placement, routing, and DRC.
- Manufacturing-file export and final review.
Current state: 36 components, 0 nets, so the schematic is not yet electrically connected. Execution stopped because your ACUs ran out.
Thought for 5 sec
I can’t give a reliable numeric ACU estimate because Flux does not expose a fixed ACU cost per schematic edit, routing run, or executor task, and usage varies significantly with retries and verification.
This project is still early—36 components and 0 nets—so budget for several substantial work sessions covering:
- Complete schematic wiring and support passives
- Power-budget, datasheet, and ERC review
- PCB placement and mechanical constraint work
- Controlled-impedance USB/RF considerations
- Routing, DRC remediation, and manufacturing exports
Check your plan’s ACU allowance and renewal date in billing. For an account-specific estimate or purchasing guidance, contact Flux support: https://docs.flux.ai/Introduction/getting-support. Execution remains stopped because your ACUs ran out.
