SX1302 LoRa Gateway
Worked for 38 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I need to create some documents and use Smart Friend, since it's important for the ESP consumer regulatory part before making any commitments. I also need to select specific sections and search the library. But first, it seems I should include power budget estimates in the specs or documents. I’ll need exact links for the documents returned. Let’s work on creating that documentation and handle smart_friend/library tasks simultaneously while updating my to-do list
sx1302 + sx1250 + sx1250 lora gateway full design
Thought for 5 sec
No design changes were made; the project remains empty because no ACUs are currently available.
Remaining work for the revised SX1302 + dual SX1250 LoRa gateway:
- Define target regional band and channel plan (EU868, US915, etc.)
- Select host interface, clocking, RF front end, filtering, protection, and power architecture
- Capture and verify the complete schematic
- Perform controlled-impedance RF placement/routing and PCB validation
Execution can continue once ACUs are available.
EU868 USB gateway schematic
US915 SPI gateway schematic
Choose core requirements
No schematic yet
Talk to Flux to get started.
