Component Selection Sources
Worked for 3 mins 31 sec
Thought for 23 sec — Assessing wire connections
Reading schematic details for J1, U1, U2 and 8 more.
Thought for 39 sec — Considering debug options
Added D3 and D4.
Thought for 3 sec — Considering wiring options
Connected J1:VBUS, J1:VBUS__1, U2:IN and 30 more.
Thought for 14 sec — Continuing configuration process
Connected U2:OUT, C3:P1, U3:VIN1 and 24 more.
Thought for 12 sec
Connected U3:SW, L1:1, L1:2 and 18 more.
Thought for 13 sec
Connected U1:VBATT, U1:ULP_IO_VDD, U1:IOVDD and 31 more.
Thought for 18 sec
Connected U4:VDD, C15:P1, R9:P2 and 14 more.
Thought for 17 sec
Connected U1:POC_OUT, R13:P1, U1:POC_IN and 23 more.
Thought for 15 sec — Debugging header pins
Connected J2:1, J2:3, J2:5 and 9 more.
Thought for 11 sec
Wired pins.
Thought for 14 sec
Updated GND, VBUS_RAW, VBUS_PROT and 5 more.
Thought for 13 sec
Referenced guidance.
Reading project docs.
Getting a schematic overview.
Thought for 14 sec — Updating tasks
5/6 Create firmware/regulatory/bring-up project files
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for a moment
Planning firmware documentation
I need to create documentation for the firmware starter. Since the SIWG917 isn’t an ESP32, there’s no common Arduino framework here. I’ll use the Silicon Labs Simplicity SDK instead. I might need to write C starter code with the Gecko SDK, which can be tricky to compile. I'll create the main C file, incorporating the em_i2c while using the WiseConnect SDK as well. It’s essential to include SHT4x low-level I2C and consider regulatory documents like the TCF.
Organizing regulatory documentation
I’m wondering if creating four documents might be overkill. What's the minimum regulatory documentation we actually need? It looks like I should produce a top-level Technical Construction File that includes checklists, RF notes, and a block diagram. I also consider adding a Preliminary Safety/FMEA, but given that this device is USB powered and doesn’t deal with mains or battery charging, it might not be needed. I can produce deliverable documents like the Declaration of Conformity and a user manual outline. Overall, I need to create concise
Thought for 3 sec
I select parts by matching requirements—electrical limits, interfaces, package, availability, certifications, and datasheet recommendations—against Flux’s component library and verified manufacturer data.
For this project, no additional component search or design edits were completed in this turn, and the project remains in its prior state. Execution stopped because your ACUs ran out.
Ask about library sources
Check part selection criteria
Find a specific part
