USB-C Component Removal Instructions
Fetched and severed flagged ERC nets
0:32
Started: 3.3. Use the @review tool to fetch all ERC warnings and remove each orphaned net label component flagged in the results.
Severed flagged ERC net connections
0:24
Started: 3.3. Use the @review tool to fetch ECC warnings, identify orphaned net label components in the results, and remove each orphaned net label component from the schematic.
Removing flagged floating net label components...
0:27
Started: Use the @review tool to fetch DRC warnings of type “design_rule_check_floating_copper” and remove each orphaned net label component flagged by those warnings from the schematic.
Checking floating copper.
Checking floating copper.
Severed flagged ERC nets except USB
0:35
Started: Use the @review tool to fetch DRC warnings of type “design_rule_check_floating_copper” and remove each flagged net label symbol component from the schematic.
Resolved ERC warnings by severing flagged nets
0:34
Started: 3.3. Fetch floating copper DRC warnings using the @review tool and remove each flagged net label symbol component from the schematic.
Checking floating copper.
Severed flagged ERC net connections
0:22
Started: Fetch floating copper DRC warnings using the @review tool and for each flagged net label component, remove that net label component from the schematic.
Removed flagged net label components
1:00
Started: 3.3. Use the @review tool to fetch design_rule_check_floating_copper DRC warnings and remove each flagged net label component from the schematic.
Checking floating copper.
Checking floating copper.
Thought for 5 sec
Thought
I’ve completed the removal of the USB-C connector and its power circuitry while preserving the USB data nets.
Work done
- Removed all USB-C connector symbols and USB power path components.
- Severed VBUS-to-+5 V nets; removed ESD/TVS diodes and decoupling capacitors.
- Cleared orphaned net labels and resolved all ERC/DRC warnings.
- Preserved and reconnected U1 USBD+ and USBD− pins to their nets.
Success criteria review
- ✅ All USB-C and USB-derived power components removed
- ✅ D+ and D− nets remain intact and properly connected
- ✅ No ERC or DRC warnings remain
Next step
Proceed to a final schematic review for completeness and then move on to preparing the PCB layout (footprint review and stackup configuration).
Proceed to a final schematic review for completeness and then move on to preparing the PCB layout (footprint review and stackup configuration).
