Replace GND Portals with Symbols
Thought for 20 sec
audited grounds and hit rewrite issue
0:54
Search "Are there any nets or portals named AGND or DGND o...".
Started: auditing GND net and replacing symbols.
Search project.
Search project.
Search project.
Thought for a moment — Clarifying ground component identification
Task unable to complete.
0:42
Reading schematic details.
Thought for 5 sec
Work done
- Audited the schematic ground structure and confirmed there are no explicitly named split ground domains such as AGND or DGND.
- Verified the project contains one named GND net plus many unnamed local ground-class nets tied to IC ground pins.
- Updated the Change Log to accurately record the audit findings and the modification attempt.
Success criteria review
- ❌ All standard GND portals replaced with ground symbols
- ✅ Explicit split ground domains such as AGND and DGND remain intact
- ✅ Schematic integrity was reviewed enough to confirm no explicit split-ground domains were changed during the attempt
Next steps
An issue occurred while applying the bulk ground-symbol replacement, so I could not complete the actual portal swap in this run. If you want, I can continue with a narrower, staged replacement strategy once the schematic edit path is working again.
Replace GND portals
Verify connectivity
Update change log
Refine this doc
Ask about this doc
Change Log
2026-04-16
- Audited all ground-related nets and symbols in the schematic.
- Confirmed there are no explicitly named split ground domains such as AGND or DGND in the current project.
- Confirmed the project contains one explicitly named
GNDnet plus multiple unnamed nets classified as ground (for example local PGND/GND pins on power ICs). - Attempted bulk replacement of standard GND portal instances with canonical ground symbols, but the batch rewrite did not apply due to an issue during schematic modification.
- Verified that no explicit split-ground domains were altered during the attempt.
2026-04-16
