Подбор на Модули за Система
Positioning TB5 near bottom edge...
0:28
Started: Position TB5 near the bottom edge for the 5 V input
174 days
Positioning J1 along top edge...
0:30
Started: 2.3. Position J1 along the top edge for the MEZZ-A header
174 days
Worked
0:34
174 days
0:00
Work done
- Board outline set to 110 mm height and ~100 mm width (rectangular)
- Ground plane enabled on inner copper layers
Tasks not completed (cannot position)
- Terminal blocks: TB1, TB2, TB3, TB4, TB5
- Connector: J1
- Main ICs and support:
- Routing prep (keepouts/via fanout) and connector orientation
- Initiate AutoLayout and run DRC review
Success criteria review
- ✅ Board dimensions 110 mm×~100 mm, rectangular outline, ground plane enabled
- ❌ Component placements (TB1–TB5, U1–U5, J1, D3, SMF05C) not positioned
- ❌ Routing preparation and AutoLayout/DRC not initiated
Next step
Proceed to the Component Placement phase: place terminal blocks TB1–TB5 along the board edges as specified.
174 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.