Schematic Component and Net List
Thought for 18 sec
Full BOM-style component list from the schematic:
Table
| Designator | Part type / part name |
|---|---|
| C1 | Generic Capacitor |
| C2 | Generic Capacitor |
| C3 | Generic Capacitor |
| C4 | Generic Capacitor |
| C5 | Generic Capacitor |
| C6 | Generic Capacitor |
| C7 | Generic Capacitor |
| C8 | Generic Capacitor |
| C9 | Generic Capacitor |
| C10 | Generic Capacitor |
| J1 | IDC-Header 2x25 P2.54mm Vertical |
| J2 | Pin Header 01x02 2.54mm Vertical |
| J3 | Pin Header 01x02 2.54mm Vertical |
| J4 | Pin Header 01x02 2.54mm Vertical |
| J5 | Pin Header 01x02 2.54mm Vertical |
| J6 | Pin Header 01x02 2.54mm Vertical |
| J7 | Pin Header 01x02 2.54mm Vertical |
| J8 | Pin Header 01x02 2.54mm Vertical |
| J9 | Pin Header 01x02 2.54mm Vertical |
| J10 | Pin Header 01x02 2.54mm Vertical |
| J11 | Pin Header 01x02 2.54mm Vertical |
| J12 | Pin Header 01x02 2.54mm Vertical |
| J13 | Pin Header 01x02 2.54mm Vertical |
| J14 | Pin Header 01x02 2.54mm Vertical |
| J15 | Pin Header 01x02 2.54mm Vertical |
| J16 | Pin Header 01x02 2.54mm Vertical |
| J17 | Pin Header 01x02 2.54mm Vertical |
| J18 | Pin Header 01x02 2.54mm Vertical |
| J19 | Pin Header 01x02 2.54mm Vertical |
| J20 | Pin Header 01x02 2.54mm Vertical |
| J21 | Pin Header 01x02 2.54mm Vertical |
| J22 | Pin Header 01x02 2.54mm Vertical |
| J23 | Pin Header 01x02 2.54mm Vertical |
| R1 | Generic Resistor |
| R2 | Generic Resistor |
| R3 | Generic Resistor |
| R4 | Generic Resistor |
| R5 | Generic Resistor |
| R6 | Generic Resistor |
| R7 | Generic Resistor |
| R8 | Generic Resistor |
| R9 | Generic Resistor |
| R10 | Generic Resistor |
| R11 | Generic Resistor |
| R12 | Generic Resistor |
| R13 | Generic Resistor |
| R14 | Generic Resistor |
| R15 | Generic Resistor |
| R16 | Generic Resistor |
| R17 | Generic Resistor |
| R18 | Generic Resistor |
| R19 | Generic Resistor |
| R20 | Generic Resistor |
| U1 | ADG1606BRUZ |
| U2 | ADG1606BRUZ |
| U3 | ADG1606BRUZ |
| U4 | ADG1606BRUZ |
Also present as schematic helper items: 190 Net Portals, 37 Ground symbols, and 25 No Connect markers.
Group BOM values
Run ERC/DRC
Export BOM CSV
Find real parts
Refine this doc
Ask about this doc
Project Specification
Board Purpose
Clean low-noise 16-electrode analog switching board.
Explicit Exclusions
- No onboard MCU
- No onboard AD5940
- No power regulation
- No USB
- No battery
PCB Target
- Fabrication target: JLCPCB
- Stackup: 4-layer
- Board size: 100 x 80 mm
Design Intent
This board should focus only on low-noise analog electrode switching/multiplexing and preserve clean analog signal integrity for an external controller/AFE system.
Board Purpose
Explicit Exclusions
PCB Target
Design Intent
