Part Verification and Datasheet Update
Thought for 4 mins 9 sec
I reviewed the part using the datasheet as the source of truth and checked the part-project metadata, symbol, and footprint against it, which is the right workflow for part verification in Flux
- I added the Datasheet URL property and set it to the official Susumu PDF: https://www.susumu.co.jp/common/pdf/n_catalog_partition38_en.pdf
Table
| Category | Result |
|---|---|
| MPN | RGT1608P-2491-B-T5 |
| Manufacturer | Susumu |
| Series | RGT |
| Part type | Thin film chip resistor |
| Package | 0603 (1608 metric) |
| Pin count | 2 |
| Resistance | 2.49 kΩ |
| Tolerance | ±0.1% |
| TCR | ±25 ppm/°C |
| Power rating | 1/16 W |
| Max voltage | 100 V |
| Operating temperature | -55 °C to 175 °C |
| Automotive | AEC-Q200 compliant |
| Special feature | Anti-sulfur |
Table
| Area | Status | Notes |
|---|---|---|
| Project description | Match | Current description is consistent with the datasheet: 2.49 kΩ, ±0.1%, 1/16 W, 0603, anti-sulfur, AEC-Q200. |
| MPN | Match | Project MPN exactly matches the datasheet part number. |
| Symbol pin count | Match | Project has 2 terminals, matching the resistor datasheet. |
| Pin numbering | Match | Pins are 1 and 2, which is correct for a 2-terminal resistor. |
| Pin type | Match | Both pins are set to Passive, which is appropriate. |
| Footprint topology | Match | The project has a 2-pad footprint, consistent with a 0603 resistor. |
| 3D model presence | Match | A STEP model is assigned. |
Table
| Area | Flag | Details |
|---|---|---|
| Datasheet property | Fixed | It was missing; now updated to the official Susumu datasheet URL. |
| Manufacturer property | Missing | I did not find an explicit Manufacturer Name project property. |
| Package property | Missing | I did not find an explicit Package or Case Code property. |
| Pin descriptions | Missing | No Pin Description property exists on either terminal. |
| Footprint geometry verification | Partial | The footprint asset name and 2-pad structure look consistent, but the available project data did not expose exact pad dimensions, so I could not numerically confirm them against the datasheet land dimensions. |
- Symbol: correct in structure for a resistor: 2 passive terminals, left/right orientation.
- Footprint: assigned footprint asset is RESC1608X55N.kicad_mod, with 2 pads, which is consistent with a 1608 metric chip resistor.
- Pad dimensions from datasheet for RGT1608:
- L = 1.60 ± 0.20 mm
- W = 0.80 +0.25/-0.20 mm
- a = 0.30 ± 0.20 mm
- b = 0.30 ± 0.20 mm
- t = 0.40 +0.15/-0.10 mm
- The part project is mostly correct.
- The important electrical identity is right: MPN, description, 2-pin passive symbol, and 0603-style 2-pad footprint.
- The main cleanup items are:
- add Manufacturer Name
- add Package or Case Code
- optionally add short Pin Description values for pins 1 and 2
If you want, I can make those metadata updates next.
Add missing metadata
Check exact footprint
Review more parts
Set Datasheet URL to "https://www.susumu.co.jp/comm..."
Set Datasheet URL to "https://www.susumu.co.jp/common/pdf/n_catalog_partition38_en.pdf"
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.