Part Datasheet Review and Update

flux

I reviewed the part project for RGT1608P-3323-B-T5, updated the missing Datasheet URL to the official Susumu PDF, and cross-checked the visible symbol/pin data against the datasheet workflow guidance, which says the datasheet should be the source of truth and pin count must match exactly
Summary

Table

AreaResultNotes
Datasheet URLUpdatedSet to official Susumu PDF
MPNMatchesRGT1608P-3323-B-T5
Part typeImplicitly resistor, but missing as project propertyDatasheet identifies RGT series as metal thin film chip resistors
Package0603 / 1608 metricMatches datasheet
Pin/terminal countMatchDatasheet indicates a 2-terminal chip resistor; project has 2 terminals
Pin numbersMatchProject terminals are numbered 1 and 2
Pin typesReasonableBoth are Passive, which is correct for a resistor
Pin descriptionsMissingNo pin descriptions found in the project
Footprint countLooks consistentLayout shows 2 pads
Footprint geometryNot fully verifiable from project dataI could not extract pad dimensions/spacing from the project tools
Key specs found
From the Susumu RGT series datasheet:
  • Series: RGT metal thin film chip resistors, wide temperature range, AEC-Q200 compliant
  • Value code 3323 decodes to 332 kΩ
  • Tolerance code B = ±0.1%
  • TCR code P = ±25 ppm/°C
  • Size 1608 = 0603
  • Power rating for RGT1608 = 1/16 W
  • Maximum voltage = 100 V
  • Operating temperature = -55°C to 175°C
  • Packaging T5 = 5,000 pcs
  • Nominal body size for RGT1608 = 1.60 mm x 0.80 mm
What matches the datasheet
  • The project MPN and designator prefix are consistent with a resistor part project.
  • The schematic symbol currently has 2 terminals, and the datasheet indicates this is a 2-terminal chip resistor
  • The terminals are numbered 1 and 2, which is appropriate for this part.
  • Both terminals are typed as Passive, which is correct for a simple resistor terminal per the part-project verification guidance
  • The layout contains 2 pads, which is consistent with a 0603 resistor footprint.
Gaps / mismatches flagged
  • Datasheet URL was missing before review; that is now fixed.
  • Manufacturer Name project property is missing.
  • Part Type project property is missing.
  • Package or Case Code project property is missing.
  • Pin descriptions are missing for both terminals.
  • Footprint dimensions were not exposed by the project tools, so I could not fully confirm pad size and pad spacing against the 0603 package drawing.
  • The datasheet extraction did not return a recommended land pattern section, so I cannot claim a full footprint-geometry pass/fail from the datasheet alone.
Recommended next cleanup
If you want, I can do one more pass and fill in the missing project metadata:
  • Manufacturer Name = Susumu
  • Part Type = Resistor
  • Package or Case Code = 0603 (1608 Metric)
I can also add simple pin descriptions like:
  • Pin 1: Resistor terminal
  • Pin 2: Resistor terminal
Fix all mismatches
Update missing datasheets
Show footprint issues
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
~
1
Passive
~
2
Passive

RGT1608P-3323-B-T5