Part Information Review

Thought for 52 sec

I reviewed the part project and found that it currently looks like a generic 2-terminal resistor part, not a fully identified manufacturer part.

What I found Project metadata

Table

Field	Current value	Status
MPN	RES	Too generic to identify an official part
Manufacturer	Not set	Missing
Part Type	Resistors	Present
Designator Prefix	R	Present
Datasheet	Not set	Missing

Schematic / symbol

Table

Item	Result
Terminal count	2
Terminal numbering	1 and 2
Pin type	Both are Unspecified
Nets	None defined

The two terminals are 1 and 2.

Footprint

Table

Item	Result
Footprint present	Yes
Package text found in footprint	RC0402N_YAG
Pad count	2

That strongly suggests the footprint is for an 0402 chip resistor.

Datasheet search result

I checked searchable uploaded files and did a web search. I did not find a trustworthy official datasheet for MPN RES or manufacturer RES. The search results indicate that “RES” is being interpreted as shorthand for “resistor,” not a real manufacturer part number.

So I did not update the Datasheet property, because that would risk inserting an incorrect URL.

Cross-check summary What is consistent

Table

Area	Assessment
Symbol pin count vs resistor type	Consistent
Footprint pad count vs symbol terminals	Consistent
2-pin resistor concept	Consistent

What I cannot verify yet

Table

Area	Why
Official package name	No valid MPN/manufacturer
Pad geometry vs datasheet	No official datasheet
Pin descriptions vs datasheet	No official datasheet
Electrical specs	No official datasheet

Key issues / mismatches flagged

Table

Issue	Severity
Manufacturer name missing	Warning
Datasheet property missing	Warning
MPN is generic/non-resolvable (RES)	Warning
Pin types are Unspecified	Minor
No pin descriptions beyond numbers	Minor

Key specs I can infer

Table

Spec	Current evidence
Part class	Resistor
Terminal count	2
Likely package	0402
Footprint label	RC0402N_YAG

Bottom line

The symbol and footprint appear internally consistent for a generic 2-pin chip resistor.
But this is not yet a validated manufacturer part, because the metadata is incomplete.
Without a real MPN + manufacturer, I can’t reliably verify package dimensions, pin descriptions, or official specs against a datasheet.

If you want, I can do the next pass once you provide the exact resistor MPN, and then I can:

find the official datasheet,
update the Datasheet property,
verify the 0402 footprint dimensions,
and check whether the terminal metadata should be tightened up.

Fix resistor metadata

Find real resistor MPN

Check 0402 footprint

Files

Pins

Symbol

Layout

3D View

Name

Pin #

Type

Section

Pin Group

Orientation

Order

Sub-symbol

Unspecified

RC0402JR-0711KL