Part Information Review and Update


I found the official datasheet for C0805C221F5GACTU, and I can update the part's Datasheet property to:
Current part information review

Table


FieldCurrent project/library stateDatasheet cross-checkStatus
MPNC0805C221F5GACTUMatches datasheet family/part codeOK
ManufacturerBlank in current part metadataWeb results identify it as KEMET / Yageo GroupMismatch / missing metadata
Package / caseC0805Datasheet says 0805 (2012 metric), 2.00 mm x 1.25 mmOK
Pin / terminal count22-terminal MLCCOK
Part typeCapacitorsMLCC ceramic capacitorOK, but generic
DescriptionC0805C221F5GACTU onlyDatasheet describes Surface Mount Multilayer Ceramic Chip Capacitor, C0G dielectricToo sparse
Datasheet URLEmptyOfficial URL foundMissing
Capacitance propertyEmptyDatasheet family supports many values; this MPN variant is sold as 220 pF in distributor listingsMissing in part metadata
Dielectric propertyEmptyDatasheet family is C0G / NP0Missing
Voltage propertyEmptyThis MPN is listed as 50 V in distributor listingsMissing
Tolerance propertyEmptyThis MPN is listed as ±1% in distributor listingsMissing
Symbol / footprint / pin check

Table


ItemWhat I foundResult
Schematic symbolTwo passive terminals onlyAppropriate for a non-polarized ceramic capacitor
Pin numberingSymbol uses pin 1 and pin 2Correct for a 2-terminal capacitor
Symbol polarityNo polarity markingCorrect for MLCC
Footprint assetCAPC2012X88N.kicad_modConsistent with 0805 / 2012 metric package family
Footprint pad count2 padsCorrect
Pad numbering vs symbolFootprint has pad 1 on the left and pad 2 on the right; schematic also has pin 1 left, pin 2 rightConsistent
3D modelPresent: C0805C221F5GACTU.stepGood
Key specs found

Table


SpecValue
Component typeSurface mount multilayer ceramic capacitor
DielectricC0G (Class I)
Case size0805 (2012 metric)
Operating temperature-55 C to +125 C
General series voltage range10 V to 250 V
General series capacitance range0.5 pF to 0.47 uF
Mismatches / concerns
  • Datasheet URL is missing
  • Manufacturer name is missing
  • Description is too minimal
  • Electrical properties such as capacitance, tolerance, voltage, and dielectric are not populated in the part metadata
  • I was able to validate symbol structure, pin count, pin numbering, and package family, but I did not extract the exact recommended land pattern table from the datasheet, so the footprint check is solid at the package/pad-count/pad-numbering level, not a full IPC land-pattern audit
If you'd like, apply the change and I'll set the part's Datasheet property to the official URL above.

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
~
Passive
2
~
Passive

C0805C221F5GACTU