Part Information Review and Update


I reviewed the part against the JST datasheet using the part-project datasheet-sync workflow: verify/set the official datasheet URL first, then compare project metadata, terminals, and footprint against the datasheet as the source of truth.
  • I updated the project’s Datasheet URL to the official JST PDF:
    • https://www.jst.com/wp-content/uploads/2025/06/ePH.pdf
Summary of part info

Table


FieldIn projectDatasheet checkStatus
MPNB5B-PH-K-SExact matchOK
ManufacturerJSTExact matchOK
Part TypeConnectorCorrectOK
Designator PrefixJAppropriate for connectorOK
Description"Connector Header Through Hole 5 position 0.079" (2.00mm) JST"Mostly correct, but could be more specificOK
Datasheet URLMissing initiallyOfficial JST URL found and setFixed
Package / Case CodeNot presentDatasheet identifies it as PH series, top-entry, through-hole, clinched, 5-circuit headerMissing metadata
Key specs from the datasheet

Table


SpecValue
SeriesPH CONNECTOR
Connector styleWire-to-board, crimp/mating style
Header typeTop entry
MountingThrough-hole
Positions5 circuits
Pitch2.0 mm
Current rating2 A AC/DC
Voltage rating100 V AC/DC
Temperature range-25 C to +85 C
Material / finishCopper alloy, tin-plated posts; PA natural (white) base housing
DimensionsA = 8.0 mm, B = 11.9 mm
Symbol check

Table


CheckResult
Pin count5 terminals present
Pin numbering1-5 present and matches 5-circuit part
Pin typeAll set to Passive, which is appropriate for connector contacts
Pin descriptionsNot populated
Footprint check

Table


CheckResult
Pad count5 pads present
Through-hole family consistencyAppears consistent with a 5-position connector footprint
Full geometry verificationNot fully verifiable from the accessible layout data alone
Mismatches / gaps

Table


ItemFindingSeverity
Datasheet propertyWas missing; now fixedFixed
Package metadataPackage or Case Code is missingMedium
Pin descriptionsNo Pin Description values are setLow
Footprint geometry auditI could confirm 5 pads, but not conclusively verify 2.00 mm pitch, drill diameter, or outline dimensions from the available layout dataMedium
Bottom line
  • No hard mismatch found between the current symbol and the datasheet.
  • The symbol pin count and numbering look correct for B5B-PH-K-S.
  • The footprint is directionally consistent because it has 5 pads, but I cannot fully prove mechanical correctness without geometry-level footprint dimensions.
  • The main issues are missing metadata, not incorrect data:
    • Datasheet URL was missing and is now fixed
    • Package or Case Code is missing
    • Pin Description fields are missing
For part projects, it’s best practice to keep exact metadata and pin fields aligned to the datasheet, and to report missing or ambiguous fields rather than guessing.
If you want, I can next fill in the missing metadata and pin descriptions.
Fix flagged mismatches
Update missing datasheets
Show worst offenders
Save review notes

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Passive
2
2
Passive
3
3
Passive
4
4
Passive
5
5
Passive

B5B-PH-K-S