Fixing Missing Traces Issue
The "Airwires" review flagged a error on M3-3:terminal, M3-1:terminal.
Reports missing routed traces between pads in a net.
Designators: M3-3:terminal, M3-1:terminal; Net: CHASSIS_GND
Context: Reports missing routed traces between pads in a net.
Help me fix this. these are just mounting holes that can bonus as gounds but dont need to be
Thought for 8 sec
I’ll remove the mounting holes from the required CHASSIS_GND connectivity so they no longer create airwires. First I’ll verify the current net membership, then disconnect only M3-1 and M3-3 from CHASSIS_GND and re-run the airwire check.
Worked for 2 mins 26 sec
The M3 airwire is cleared, but disconnecting the optional holes exposed schematic warnings because the mounting-hole pads are now intentionally unused. I’m cleaning that up by marking the mounting-hole terminals as no-connects so they won’t demand routing or generate floating/single-pin warnings.
Worked for 1 min 35 sec
Fixed. I removed the M3 mounting-hole terminals from CHASSIS_GND routing requirements and marked them as intentional no-connects, since they’re optional “bonus” chassis grounds.
Validation: the Airwires review is now clear for this issue, and the M3 mounting holes no longer show related floating/single-pin warnings.
Recheck grounding issues
Add mounting keepouts
Check chassis ties
Document M3 intent
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.