Custom Motherboard Design Inquiry

flux

I can’t execute project changes right now because the session has no remaining execution credits, so I have not added components, schematic wiring, layout, or project files to the Flux project.
Current project state:
  • Components: 0
  • Nets: 0
  • Schematic: empty
  • PCB layout: not started
  • Component list/BOM: not generated
  • Power architecture: not designed yet
What remains to be done for this motherboard:
  1. Define the CPU/platform
    A Linux-capable SBC with DDR3, SATA III, USB, HDMI, Ethernet, Wi-Fi, and GPIO needs a specific processor or SoC. A “modern” x86/ARM CPU with 6 DDR3 DIMM/SO-DIMM slots is a very complex high-speed design and usually requires:
    • CPU/SoC datasheet and reference design
    • DDR3 memory layout rules
    • PCIe/SATA/USB/HDMI controlled-impedance routing
    • Power sequencing requirements
    • BIOS/boot firmware support
  2. Choose a realistic architecture
    Practical options include:
    • ARM SoC/module-based design using a compute module with DDR already integrated
    • x86 COM Express / SMARC / Qseven module carrier board
    • Custom SoC board, much harder and not beginner-friendly
    • Mini-server carrier board using an existing CPU module plus SATA, USB, Ethernet, HDMI, GPIO, and power management
  3. Create schematic blocks
    Required blocks would include:
    • CPU or compute module
    • DDR3 memory subsystem or module connector
    • Power input: ATX/DC input, protection, regulators, sequencing
    • SATA III connector and ESD protection
    • USB hub and USB connectors
    • HDMI output with ESD/level/retimer needs depending on source
    • Ethernet PHY/magnetics/RJ45
    • Wi-Fi module, likely M.2 E-key or soldered module
    • GPIO headers with protection/level compatibility
    • Storage connectors: SATA, M.2, eMMC, or microSD depending on platform
    • Fan header and CPU cooling/mechanical support
    • Expansion connectors
  4. Generate PCB layout
    This would require:
    • Board size and connector edge placement
    • Controlled-impedance stackup
    • DDR3 length matching
    • SATA/USB/HDMI differential pair routing
    • Thermal copper and cooling clearance
    • Power plane strategy
    • EMI/ESD protection placement
  5. Verify before completion
    The design would need ERC/DRC review, datasheet checks, and high-speed layout constraints before it could be considered usable.
Recommended next step: choose the compute architecture. For a buildable student-friendly mini-server motherboard, I recommend designing a carrier board around an existing Linux-capable compute module instead of designing a raw CPU + 6-slot DDR3 motherboard from scratch. A COM Express or SMARC module would be the most realistic path for SATA, USB, HDMI, Ethernet, PCIe expansion, and Linux support.
Use COM Express
Find compute module
Save requirements
Simpler first revision
DDR3 difficulty
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Dear Sapphire Neuralizer

    Dear Sapphire Neuralizer thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Properties describe core aspects of the project.

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls