Reference Schematic Notes
The user supplied Screenshot 2026-10-13 085845.png, a guitar distortion circuit labeled “Distortion by DGB.” No explicit task accompanied the image.
Visible reference
- 741 op-amp gain stage, with a 1 MΩ feedback resistor and a 500 kΩ gain control.
- Input filtering/coupling labeled 1 kΩ, 47 pF, and .01; a VCC bias divider labeled two 10 kΩ resistors, with 10 µF bypass and 1 MΩ input bias resistor.
- Output coupling labeled 1 µF, a 12 kΩ resistor, opposing shunt clipping diodes, and a 50 kΩ output level control.
- A bypass switch connects the output to either the processed signal or a direct input path.
- Additional tone/filter controls and an inset network are shown; their intended implementation needs clarification before capture.
Open items
Supply voltage, diode types, precise potentiometer taper conventions, capacitor units where omitted, and the intended use of the inset network are not confirmed. The image does not provide enough information to verify supply connections or footprint choices.
Project state and continuation
The project context reports zero components and zero nets. No circuit or layout edits were made. Ask whether the user wants this schematic recreated in Flux or reviewed/explained first. Execution stopped because the account ran out of ACUs.