ESP32 Relay Schematic
Worked for 36 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for a moment
Creating documentation and estimates
I need to create some documents and use Smart Friend, since it's important for the ESP consumer regulatory part
RELAY INTERFACING WITH ESP32 SCHEMATIC
Thought for 5 sec
The project is still empty—no relay-interface schematic or components have been added because no ACUs are currently available.
Remaining work: add an ESP32-compatible relay driver using a GPIO resistor, N-MOSFET, flyback diode, gate pulldown, relay coil supply, and protected COM/NO/NC contacts; then verify GPIO voltage, relay-coil current, and power isolation. Replenish ACUs to continue execution.
Create parts list
Show schematic connections
Relay power isolation
Find relay parts
No schematic yet
Talk to Flux to get started.
