I’ll route the PCB now. I’ll first check the layout/review state for routing prerequisites and stale traces, then run the autorouter and verify remaining DRC/airwire issues.
Prerequisites look good: the board is 25 × 25 mm, 2-layer, components are placed, and the only blocking layout issue is 3 airwires. I’m starting the autorouter now.
Routed the board successfully and widened all routed traces/nets to 1.0 mm. Routing DRC is clean now — no airwires or trace/copper errors remain.
Unrelated remaining review items: floating pins on R4/C2 and missing MPNs on generic passives, which I did not change because you only asked for routing.
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film
Features:
- RMCF – standard power ratings
- RMCP – high power ratings
- Nickel barrier terminations standard
- Power derating from 100% at 70ºC to zero at +155ºC
- RoHS compliant, REACH compliant, and halogen free
- AEC-Q200 compliant