WiFi & Bluetooth Sensor Node
Worked for 1 sec
I’ll build the schematic for a USB-C powered Wi‑Fi/BLE temperature/humidity sensor node: set requirements, choose parts, add/wire power protection, MCU, sensor, and then run checks.
Thought for 10 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 8 sec
Reading project docs.
Demo Complete
The demo is finished. It didn't use any ACUs. You can now continue working with this project like normal.
No schematic yet
Talk to Flux to get started.
