555 LED Blinker PCB
Worked for 2 mins 58 sec
Implemented the 9V hand-solderable red LED blinker schematic using a TI NE555P DIP-8, through-hole LED, slide switch, PP3 9V battery holder, axial resistors, and through-hole capacitors. The 555 astable is set to about 1.06 Hz with ~50% duty cycle, so the LED blinks roughly once per second; electrical connectivity checks are clean.
Open items:
- PCB layout/routing is not done yet, so airwire DRC errors are expected.
- Generic passives have through-hole packages and values, but not exact manufacturer part numbers yet.
Suggested next steps:
- Assign exact MPNs for the generic resistors/capacitors if you want a manufacturable BOM.
- Move into PCB layout: size the board, place the battery holder/switch/LED, then route.
- Add silkscreen labels for battery polarity, switch ON/OFF, and LED orientation.
Start Auto-Layout
Thought for 2 sec
I can’t analyze or modify the PCB because the account currently has no available ACUs, so AI layout features are unavailable.
Current project state:
- Complete 9V NE555 LED-blinker schematic with 11 through-hole components and 8 nets.
- Recent PCB position/rotation edits exist, but placement quality and routing status have not been verified.
- Auto-placement and/or auto-routing still need to be determined and executed once ACUs are available.
Inspect layout status
Check DRC issues
Plan manual placement
