Trimmed version of the area used by the pads.
It's recommended to use ENIG when producing this PCB to not ruin the XBOX's pins.
These pads are only meant to be use if you're building an original xbox converter of any kind.
Shouhan
8.7mm
Package
None
https://www.snapeda.com/parts/SS12D07VG4/Shouhan/view-part/?ref=eda
Manufacturer Recommendations
1
https://www.snapeda.com/parts/SS12D07VG4/Shouhan/view-part/?ref=snap
SS12D07VG4
Switch Slide ON ON SPDT Top Slide 0.3A 30VDC PC Pins Bracket Mount/Through Hole Automotive Bulk
Not in stock
Shouhan
The mounting pads at the bottom of the board are removed from the footprint.
RP2040 Raspberry Pi Pico - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #part
Tactile Switch SPST-NO Top Actuated Through Hole, Outline 6.00mm x 6.00mm, Actuator Height off PCB, Vertical 5.00mm #switch #commonpartslibrary #Throughholetactilebutton
Pi Pico board with USB C!
This model doesn't reflect the reality of the pin holes. What's important about this model is the USB C size and position to better help 3D modelling. This is V1 which has a port further away from the side of the PCB.
RP2040 Raspberry Pi Pico - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board #part
