Resistor Placement Guidance
Thought for 28 sec
Below are the steps to export your design files from Flux:
-
Bill of Materials (BoM):
- Open your project and click the export or project menu.
- Select the BoM Export option to generate a CSV or BOM file with component details.
-
Schematics:
- Open the schematic tab.
- Use the export function (often found in the File or Export menu) to generate a PDF or other standardized schematic file.
-
Pick and Place File:
- In the PCB layout tab, look for the Pick and Place Export option.
- This file usually contains the positions, rotations, and designators for all components, in a format suited for assembly.
-
Gerber Files:
- Switch to the PCB layout view.
- Open the export options and select Export Gerber Files.
- Make sure to verify your board layer stackup, solder masks, and silkscreen layers per your manufacturing requirements.
For additional detailed instructions and tips, you can refer to Flux's Help documentation on exporting files. Let me know if you need further guidance on any export step.
Export Settings Check
Ready-to-export Verification
Next Manufacturing Step
