Spider-Man Web Shooters
Worked for 49 sec
The prior routing job no longer exists, so I’m starting a fresh pass. The only preflight warnings are the USB-C connector’s own shield/GND pads inside its footprint keepouts; the router explicitly ignores those local keepouts, so no placement change is needed.
Thought for 26 mins 25 sec
A fresh routing job was started and preserved as auto-layout-3402e732-f0c9-4eac-9443-2011ebf33390, but paused because no ACUs remain. The board currently has 78 airwires, plus USB-C keepout warnings and one board-boundary placement error; after adding ACUs, resume this job, resolve the boundary issue, then complete routing and final DRC.
proceed
Worked for 1 min 1 sec
The saved routing job has expired, so I’m starting a new full-board route from the existing placement and neckdowns. The remaining preflight warnings are limited to USB-C shield/ground pads within their own footprint keepouts.
Thought for 25 mins 24 sec
A new routing job was created and preserved as auto-layout-5ab1a155-8eb2-4ce1-a495-1f8df4b1f161, but paused because no ACUs remain.
Remaining
- Add ACUs and resume this job.
- Resolve one board-boundary placement error.
- Review six USB-C shield/GND footprint-keepout warnings.
- Complete routing and verify zero airwires and blocking DRC errors.
Review board-boundary error
Inspect USB-C warnings
Prepare routing constraints
