Fixing Missing PCB Connections
Thought for 4 sec
I’ll inspect the CELL_MAIN_TXD airwire, route the missing connection between U13:MAIN_TXD and U11:A2, then re-run the airwires check to confirm it’s cleared.
Worked for 1 min 20 sec
Routing is currently blocked because 18 components still have automatic PCB positions; I’m going to place only those unplaced items so the router can run, then route the missing net.
Worked for 6 mins 47 sec
I’m blocked because your account has no available ACUs, so I can’t run additional routing or verification tools right now.
What I completed:
- Checked the reported CELL_MAIN_TXD airwire; the existing review didn’t show that exact error anymore, but routing pre-check found the router was blocked.
- Fixed the routing blocker by placing the components that still had automatic PCB positions.
- Placement also moved U11, J_ANT_MAIN, and C_ANT2 to clear space, with no overlap or out-of-bounds issues reported afterward.
Still remaining:
- Route the CELL_MAIN_TXD connection between U13:MAIN_TXD and U11:A2.
- Re-run the Airwires review to confirm the error is cleared.
Once ACUs are available again, the next step is to run routing for CELL_MAIN_TXD and verify the Airwires check.
Locate CELL_MAIN_TXD
Routing parameters
Verify net assignment
Run Airwires review
