ESP32-S3 Component List

flux

Below is an updated project intent that you can add to the project properties. It outlines the design using the ESP32-S3-WROOM-1-N8R8, USB-C 2.0 Receptacle, and CP2102N-A02-GQFN28 for a USB to UART solution, with a regulated 3.3V rail supplied by the AMS1117-3.3. You may update the project description (or project properties) with text like the following:
Design Intent:
After updating the project properties with these design considerations, the next step is to add the corresponding schematic passive components. For example:
  • Add decoupling capacitors (e.g., designate them as [C3] for 100nF and [C4] for 10µF) between the AMS1117-3.3’s output and the power rail feeding the ESP32-S3-WROOM-1-N8R8.
  • Add a 100nF capacitor ([C5]) on the USB-C 2.0 Receptacle’s VBUS line.
  • Add a resistor (e.g., designate it as [R1] with a 56kΩ value) to configure the CC line on the USB-C 2.0 Receptacle.
Feel free to update your project properties with these guidelines and then proceed to add the corresponding components into the schematic.
Add decoupling capacitors
Add 56kΩ CC resistor
Add 100nF VBUS cap
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Diverse Violet Liquid Breathing Apparatus

    Diverse Violet Liquid Breathing Apparatus thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Utilize an ESP32-S3 module as the main processing unit, a USB-C connector interfaced with a CP2102 USB-to-UART converter, and an AMS1117-3.3 voltage regulator to provide a stable 3.3V supply to the ESP32. Include necessary passive components: 100nF and 10µF decoupling capacitors at the regulator output, a 100nF capacitor on the USB-C VBUS line, and a 56kΩ pull-down resistor on the USB-C CC line to ensure proper current configuration. Additional resistor networks and capacitor circuits should be implemented as needed for signal conditioning between the USB-C and USB-to-UART converter, and between the regulator and the ESP32.

    Pricing & Availability

    Distributor

    Qty 1

    Arrow

    $2.09–$3.49

    Digi-Key

    $9.98–$11.07

    LCSC

    $8.89–$9.07

    Mouser

    $7.93

    Verical

    $2.11–$4.99

    Controls