Part Information Review and Updates

flux

I reviewed the part project against the datasheet and the current part definition.
Part info review Current project metadata

Table

FieldCurrent valueDatasheet checkStatus
Manufacturer Part NumberXL4016Matches datasheet MPNOK
Manufacturer NameXLSEMIMatches datasheet manufacturerOK
Description8A 180KHz 40V Buck DC to DC ConverterMatches datasheet descriptionOK
Datasheet URLalready setPresent, so no web lookup/update was neededOK
Package or Case CodeTODatasheet package is TO220-5LMismatch
Designator PrefixPSNot contradicted by datasheetOK
Key specs from the datasheet

Table

ParameterValue
FunctionBuck DC-DC converter
PackageTO220-5L
Switching frequency180 kHz fixed
Recommended input range8 V to 36 V
Adjustable output range1.25 V to 32 V
Load capability8 A
Constant output current capability12 A
Max efficiencyup to 96%
Protection/featuresthermal shutdown, current limit, short-circuit protection
Symbol / pin cross-check Datasheet pinout

Table

PinDatasheet nameCurrent terminalStatus
1GNDGNDMatch
2FBFBMatch
3SWSWMatch
4VCVCMatch
5VINVINMatch
Metal tabSWno separate terminal foundMismatch / missing representation
What matches
  • The five numbered terminals in the schematic match the datasheet names and numbers exactly.
  • The footprint also contains pads named GND, FB, SW, VC, and VIN, so the basic pad naming is aligned with the symbol.
Issues I found

Table

AreaIssueSeverity
Package metadataProject says TO, datasheet says TO220-5LMedium
Pin countDatasheet also lists the metal tab connected to SW, but the project currently has only 5 terminalsHigh
Pin typesAll terminals are still set to Unspecified: GND, FB, SW, VC, VINHigh
Pin descriptionsNo pin descriptions are populated on the terminalsHigh
Symbol completenessNo dedicated terminal for the exposed/tab connection, even though exposed pads/tabs should be represented when listed in the datasheetHigh
Recommended pin property fixes

Table

TerminalRecommended pin typeShort pin description
GNDGroundPower ground
FBInputFeedback input
SWPower OutSwitch node output
VCUnspecified or PassiveRegulator bypass pin
VINPower InSupply input
new tab terminalGround not correct; should electrically follow SW nodeThermal tab / switch tab
Footprint check
  • I could confirm the footprint has pads for the five named pins.
  • I could not fully verify pad geometry/mechanical dimensions from the currently returned layout data.
  • The main footprint-level concern is still the same: the datasheet package is TO220-5L, while the project metadata is only TO, and the metal tab tied to SW is not represented as its own terminal.
For part-project verification, the datasheet should be treated as the source of truth, pin numbers must match exactly, and exposed/thermal pads count as pins when the datasheet lists them .
Summary
  • Good: MPN, manufacturer, description, and the 5 numbered pin names/numbers are correct.
  • Needs fixing: package metadata, pin types, pin descriptions, and likely the missing metal tab = SW terminal.
  • No datasheet URL action needed: a datasheet URL is already set, so I did not search/update it.
If you want, I can fix the part metadata and terminal properties next.
Fix metadata and pins
Check footprint dimensions
Review all power parts
Document review findings
Sign up to send
GND
Pin Number
1
VIN
Pin Number
5
FB
Pin Number
2
SW
Pin Number
3
VC
Pin Number
4
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.1k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

XL4016

XL4016 thumbnail
8A 180KHz 40V Buck DC to DC Converter The XL4016 is a high-efficiency DC-DC step-down (buck) switching regulator IC designed for applications that require high current output and simple external component design. It is commonly used in power supplies, LED drivers, battery chargers, and automotive/industrial DC conversion systems. Type: Step-down (buck) DC-DC converter Input voltage range: ~8 V to 40 V Output current: up to 8 A (practically ~5–6 A continuous with good cooling) Output voltage: adjustable via external resistors Switching frequency: ~180 kHz Built-in high-current power MOSFET switch Current-mode PWM control Cycle-by-cycle current limiting Thermal shutdown protection Short-circuit protection PackageTypically available in TO-220-5L package (with heat sink tab) Designed for external diode, inductor, and capacitor components Typical Applications DC power supply modules LED constant-current drivers Battery charging circuits Automotive 12V/24V step-down systems DIY adjustable bench power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Properties

XL4016

XLSEMI

Power Management

makerfabs.com/desfile/files/XL4016-Datasheet.pdf?srsltid=AfmBOorxDJlb9ZdY7HuWkaxSSxQ2jKlPKrxPzYJ0C8N4t5mqFoo529wg

PS

TO

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls