Part Review and Datasheet Validation
Fix the missing pin descriptions and electrical pin types from the datasheet add also section for all the terminal.
Thought for 4 sec
I’ll populate every W55RP20 terminal with the datasheet pin description, electrical pin type, and a functional section, then re-read the schematic to verify the properties were applied.
Thought for 47 sec
The first batch applied, but Flux warned that some values were non-standard; I’m normalizing them to the accepted Pin Type/Section options as I finish the rest.
Thought for 1 min 37 sec
Finished. I populated all 69 W55RP20 terminal pins with datasheet-derived Pin Description, standardized Pin Type, and Section, then verified the schematic properties were present.
Open items:
- I used Flux-standard Pin Type values where needed, e.g.
Power In,Power Out,Bi-Directional,Input,Output, andGround, rather than raw datasheet labels like AO/AI/PWR.
Suggested next steps:
- Update the Datasheet URL to the official WIZnet v1.0.2 PDF.
- Re-run a final part review/export check before publishing or using this part in designs.
Update datasheet URL
Run final review
Verify footprint geometry
Check publish readiness
