Pin Function Grouping

Looking at the datasheet of this component, can you group together pins by their functions?
for example for Power, 3v3, gnd_1 gnd_2 etc
NOTE: If you group them, can you not add the same pin if you already added them in a group? You should know which pin function is common for its function.

Worked for 9 sec

flux

I’ll check the component’s datasheet pin table and current project pin list, then group each physical pin once by its primary function.

Worked for 4 mins 55 sec

flux

I found the VQFN/RGE pin table. I’ll now apply primary-function group labels so no pin appears in more than one group.

Worked for 1 min 34 sec

flux

Done. I grouped all 25 TCA9548ARGER VQFN pins from the TI datasheet, with each physical pin assigned to exactly one primary function group.

Groups applied:

Power: VCC
Ground: GND, EP
Controller I²C Bus: SDA, SCL
I²C Channels 0–7: SDx/SCx paired per channel
Address: A0, A1, A2
Reset: ~RESET

I also updated pin types and descriptions to match the datasheet, including pull-up guidance for the I²C and reset pins.

Verify pin grouping

Use broader groups

Check exposed pad

Add pin documentation

Review symbol layout

Files

Pins

Symbol

Layout

3D View

TCA9548ARGER